Technology makes production safer.
Common Problems and Solutions of Wire Rope Nondestructive Testing Instrument
Release time:
2023-03-13
Common Problems and Solutions of Wire Rope Nondestructive Testing Instrument
Common Problems and Solutions of Wire Rope Nondestructive Testing Instrument
Wire rope nondestructive detectorCommon problems and solutions:
1. For the case of whether to turn on or not, we must first consider whether there is no electricity. When there is no electricity, we need to find a charger to charge, and then use it. If the power is turned on or not, we can try to press the power button several times, but the interval should be not less than half a minute. If it still fails, we need to consider whether it is damaged and let technicians check and repair it.
2. Regarding the automatic shutdown phenomenon of the wire rope non-destructive testing instrument, first consider whether the power quantity is too low. For the sake of protection, it is necessary to charge the machine first, then start the machine and try. If it cannot be opened, contact for maintenance.
3. When there is no echo display, the memory may be confused for some reason. In this case, we need to restore the factory settings, open another normal flaw detection channel after restarting the machine, and also see whether the probe is connected correctly or normally. If it cannot be judged, we can restore the system parameters to the factory state, then connect the straight probe with a new probe wire, and detect on a thin test block with good coupling, if there is echo, it may be due to improper setting of original parameters or poor contact of probe line.
4. When using the keyboard, pay attention to the correct operation mode, and at the same time pay attention to ensuring that every key is pressed.
5. Regarding the crash, if we cannot restart it even if we force the power supply to shut down, we can look at the instructions of the wire rope non-destructive tester to find out the method to solve it. If it is really not possible, we can find the manufacturer's phone for consultation!
The above is the common problems and solutions of steel wire rope detectors. In fact, we all know that even in sophisticated machinery and equipment, failures cannot be avoided. However, the occurrence of these failures will cause staff to delay their work. Therefore, it is very important to solve the failures, especially for some common failures, to know how to deal with them, so that they can be used more smoothly, the test results can be more accurate.
The article content comes from the wire rope nondestructive testing instrument://m.priceaide.com/
recommend News
Service hotline
China (Henan) Pilot Free Trade Zone Luoyang Area High-tech 288 Heluo Road, Development Zone
Wechat Number
SAF Coolest v1.3.1.1 设置面板
GAGSD-ZGYF-JXSVE-SAS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page