Technology makes production safer.
The use of wire rope nondestructive testing instrument
Release time:
2023-02-01
With the widespread use of wire rope nondestructive testing instrument, more and more people begin to pay attention to its use method. Below, the editor of Luoyang Baikte Technology Development Co., Ltd. will tell you!
The use of wire rope nondestructive testing instrument
WithWire rope nondestructive detectorIt is widely used, and more and more people are beginning to pay attention to its use. Below, the editor of Luoyang Baikte Technology Development Co., Ltd. will tell you!
1. After the use of the test is completed, the results should be sorted and analyzed to see if they are accurate. If there are doubts, the test can be carried out again. If it is confirmed to be correct, the technical personnel can cooperate to remove the wire rope nondestructive detector.
2. Pay attention to it after removing it. First check the wire rope non-destructive detector to see if there is any fault or other problems in the whole wire rope detector. Turn on the switch to see if it can operate normally. At the same time, pay attention to the power condition of the detector.
3. After that, use tools to clean the detector to remove stains and dust, so as to prevent the wire rope nondestructive detector from receiving pollution problems and affecting normal use.
4. After cleaning, according to the power situation of the wire rope non-destructive detector to see if it needs to be charged, if the power is insufficient, it needs to be charged to ensure the normal use of the next time.
5. When the charging work is completed, special attention should be paid to confirm that the wire rope nondestructive detector is already in the shutdown state and in good condition. After that, the wire rope nondestructive detector should be packed and placed in a suitable position. Attention should be paid to a dry and ventilated position to avoid dark and humid positions, so as to prevent the use from being affected by moisture and avoid direct sunlight.
6. In addition, if there is a problem with the wire rope detector, whether it is a fault or some other minor problems, it should be handled in time. The fault problem should be repaired in time. In addition, attention should be paid to the maintenance work, so as to ensure the accuracy of the test results and prepare for the next test.
The article content comes from the wire rope nondestructive testing instrument://m.priceaide.com/
recommend News
Service hotline
China (Henan) Pilot Free Trade Zone Luoyang Area High-tech 288 Heluo Road, Development Zone
Wechat Number
SAF Coolest v1.3.1.1 设置面板
GAGSD-ZGYF-JXSVE-SAS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page